GEOLOK

Geolok™ is a low-exothermic spray foam designed to stabilize pipelines, manage erosion and minimize runoff and washout. Geolok™ will hold pipelines in place and provide support during the construction process. It can be applied to create a rock shield, which is a large area sprayed over pipes to protect the pipeline during construction and throughout the backfill process. This product can also be used in specific retrofit building envelope applications.

Product Benefits

  • Aged Thermal Resistance of 7.36 at 1 inch
  • Up to 4 Feet High @ 4 in. per pass (no wait time)
  • Low exothermic spray foam
  • Holds pipelines in place during construction
Get in touch

Product Data

Other OTHER FOAM SOLUTIONS Products

  • FOAM-LOK FL 10K

    FOAM-LOK-FL-10K is a high density spray applied foam designed for use as a protective top coat. The primary use for this product is as a protective coating in the poultry industry. The typical spray applied density of this product ranges from 8.0 to 11.0 pounds per cubic foot.


    This product is to be process through standard spray foam metering equipment at a ratio of 1:1 by volume, with the heater for the “A”, “B” and hose set for 125°F to 130°F.

    • Viscosity 1200 – 1600 cps
    • Cream Time 5-8 Seconds
    • Tack Free Time 14-16 Seconds

  • GEOLIFT

    Geolift is a water-blown concrete lifting foam for both residential and commercial use on driveways, sidewalks and patios.

     

    • Available in 2.5 lb and 4 lb densities
    • Application in wider ambient temperature range
    • Hydrophobic properties

  • HEATLOK HIGH TEMP

    Heatlok High Temp is a two-component closed-cell spray foam insulation specially formulated to perform in temperatures as high as 250°F. For use in tanks, pipes and other applications.

    • Aged Thermal Resistance: 7.27 @ 1 inch
    • Tested Water-Resistant Barrier (WRB)
    • Greenguard Gold Certified- Low VOC

  • LOW PRESSURE KITS

    Low Pressure Kits are designed to offer contractors a seamless transition from large to small jobs, with the foam ideally suited for filling and sealing various sized voids and surfaces, deadening sound and reducing vibrations.

    It can be applied to clean, dry substrates including wood, masonry, metal and drywall, where the material’s strong adhesion properties work to create an air barrier.

    • Available in closed-cell with an Aged Thermal Resistance of 6.0 @ 1 inch
    • Available in open-cell with an Aged Thermal Resistance of 4.3 @ 1 inch

  • PIP FOAM

    Specially formulated for field or factory injected applications using high or low pressure equipment. High performance polyurethane foam systems using HFO blowing agent which has a low impact on the environment.  Also available in open cells.

    • Initial R-value of 3.4 to 7.5 per inch (0.6 to 1.32 RSI).
    • Open and closed cell foam
    • Density from 0.5 to 2.5 lb