MAXFLEX

MAXFLEX 309 is a two-component polyurethane flexible molded foam system using water as the blowing agent. 

MAXFLEX 312 + Suprasec 7007 is a two-component polyurethane flexible molded foam system specially formulated for parts requiring firmness.

Product Benefits

  • Used for furniture foam cushioning or other molded parts
  • Can be processed and poured on both high and low pressure equipment

Product Data

Other OTHER FOAM SOLUTIONS Products

  • GEOLIFT

    Geolift is a water-blown concrete lifting foam for both residential and commercial use on driveways, sidewalks and patios.

     

    • Available in 2.5 lb and 4 lb densities
    • Application in wider ambient temperature range
    • Hydrophobic properties

  • GEOLOK

    Geolok™ is a low-exothermic spray foam designed to stabilize pipelines, manage erosion and minimize runoff and washout. 

    • Aged Thermal Resistance of 7.36 at 1 inch
    • Up to 4 Feet High @ 4 in. per pass (no wait time)
    • Low exothermic spray foam

  • BARNSEAL

    Barnseal is a high R-value, air-sealing insulation solution developed for use in poultry, dairy, equestrian, farm and ranch applications. 

    • R-value of 7.15 at 1 inch
    • 6-pound density foam
    • Non-biocide darkling beetle control

  • HEATLOK HIGH TEMP

    Heatlok High Temp is a two-component closed-cell spray foam insulation specially formulated to perform in temperatures as high as 250°F. For use in tanks, pipes and other applications.

    • Aged Thermal Resistance: 7.27 @ 1 inch
    • Tested Water-Resistant Barrier (WRB)
    • Greenguard Gold Certified- Low VOC

  • HEATLOK HIGH DENSITY

    Heatlok High Density is a range of products specially formulated using recycled plastic and renewable soya oil. It contains zero ozone-depleting chemicals.

    • Available in various densities with higher yields
    • Mainly for floor, below slab, tank pads, etc.
    • Specially designed to be used in high compressive strengths applications

  • LOW PRESSURE KITS

    Low Pressure Kits are designed to offer contractors a seamless transition from large to small jobs, with the foam ideally suited for filling and sealing various sized voids and surfaces, deadening sound and reducing vibrations.

    It can be applied to clean, dry substrates including wood, masonry, metal and drywall, where the material’s strong adhesion properties work to create an air barrier.

    • Available in closed-cell with an Aged Thermal Resistance of 6.0 @ 1 inch
    • Available in open-cell with an Aged Thermal Resistance of 4.3 @ 1 inch

  • PIP FOAM

    Specially formulated for field or factory injected applications using high or low pressure equipment. High performance polyurethane foam systems using HFO blowing agent which has a low impact on the environment.  Also available in open cells.

    • Initial R-value of 3.4 to 7.5 per inch (0.6 to 1.32 RSI).
    • Open and closed cell foam
    • Density from 0.5 to 2.5 lb