THERMO-FLEX 500 (Acrylic Coating)

Thermo-Sil 2200 Series silicone roof coating is a single-component, moisture-curing silicone rubber roof coating system designed for use on existing smooth surface BUR, granulated cap sheet, well-adhered acrylic coating, concrete, metal, sprayed-in-place polyurethane foam and various single-ply membrane roofing.

• Withstands extreme weather conditions, damp heat and UV rays
• Seals and Protects against permanent ponding water
• Great adhesion, Continuous membrane

Thermo-Sil LS 2200 is a silicone, elastomeric low-solids, solvent-free roof coating designed to provide a protective wear surface, reflectivity, and renewability. It is a moisture-cured roof coating designed to provide long-lasting performance in the most rigorous climates.

• Withstands extreme weather conditions, damp heat and UV rays
• Seals and protects against permanent ponding water
• Great adhesion, Continuous membrane

Thermo-Sil HS 3200 Series silicone roof coating is a high solids single-component, moisture-curing silicone rubber roof coating system designed for use on existing smooth surface BUR, granulated cap sheet, well-adhered acrylic coating, concrete, metal, sprayed-in place polyurethane foam and various single-ply membrane roofing.

• Withstands extreme weather conditions, damp heat and UV rays
• Seals and protects against permanent ponding water
• Great adhesion, Continuous membrane

Thermo-Sil Pro™ 9600 is the ultimate high solids silicone coating for professionals in the roofing industry. Advanced direct-bond technology provides extreme adhesion and proven protection against high winds and weather.

• Cost-saving alternate solution to re-roofing the building structure
• Coat metal buildings to prevent rust
• Use on low-sloped or flat roof systems, vertical walls, masonry, metal and more!

SP-11 is a black, single-component epoxy primer incorporating state-of-the-art water-based technology to produce an extremely versatile product that penetrates and seals porous substrates. It is effective at increasing the bond of silicone topcoats to a variety of surfaces and will also help to “solidify” punky or chalky surfaces.

• Adhesion - penetrates and “wets” into porous surfaces, imparting a tenacious chemical and physical bond between the substrate and topcoat
• Easy cleanup and minimum maintenance
• Deep penetrating to preserve dense surfaces

Thermo-Sil SP-14, as provided, is a two-component, 1 to 4 ratio, water-based epoxy primer designed to go onto multiple substrates.

Thermo-Sil SP-15 has been formulated with specialty polymers to maximize adhesion to PVC and TPO membranes and to resist the migration of plasticizers from the PVC membrane.

Thermo-Sil Flashing Grade Silicone Sealant is a thick, high-build liquid that is a dispersion of 100% silicone rubber. It is designed to seal abnormal roof penetrations that cannot be covered with standard sprayers or rollers. It features low odor, ease of application, fast moisture cure, and superior adhesion to a variety of substrates.

• Low odor
• Easy to apply
• Fast moisture cure

RCS 5000 is a premium fluid-applied, elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

• Superior exterior durability and UV light resistance
• Excellent adhesion to most roofing materials
• Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS-5000C is a premium quality, fluid-applied elastomeric roof coating manufactured using advanced all-acrylic polymer technology. The fully-adhered seamless membrane exhibits outstanding adhesion, strength, flexibility and water resistance.

• Superior exterior durability and UV light resistance
• Excellent adhesion to most roofing materials
• Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 5000FS is a premium fluid-applied, fast-set elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

• Superior exterior durability and UV light resistance
• Excellent adhesion to most roofing materials
• Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 5000QS is an acrylic fluid-applied, quick-set elastomeric coating designed to enhance energy savings and water resistance, protecting and increasing the longevity of the structure. It withstands intense heat and ultraviolet rays in humid climates.

• Superior exterior durability and UV light resistance
• Severe Hail Rated with LPA Roofing Foam and Coating System
• Seamless, fully-adhered elastomeric membrane

RCS 600 is a fluid-applied, elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

• Superior exterior durability and UV light resistance
• Excellent adhesion to most roofing materials
• Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 650 is a fluid-applied, elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

• Superior exterior durability and UV light resistance
• Excellent adhesion to most roofing materials
• Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 30 is a 100% acrylic emulsion, waterborne, corrosion-resistant direct to metal primer for both construction and industrial maintenance applications. It can be used directly over metal substrates to dramatically improve adhesion of Huntsman Building Solutions RCS Restoration Coating System 100% acrylic elastomeric roof coatings when substrates are less than optimal.

• Chemical resistant
• Chemical resistant
• Outstanding exterior durability

RCS 40 rinseable primer is a surface treatment solution that alters the surface chemistry of EPDM membranes to dramatically improve adhesion of Huntsman Building Solutions RCS 5000 Restoration Coating System, 100% acrylic elastomeric roof coatings.

• Environmentally safe (diluted rinse water)
• Easy to apply
• Easy soap and water clean-up

RCS 4000 is a premium quality, fluid-applied, elastomeric roof coating manufactured using advanced all-acrylic polymer technology. The fully-adhered seamless membrane exhibits superior adhesion to new asphaltic roofing materials.

• Superior adhesion to new asphaltic roofing membranes
• Excellent resistance to asphalt “bleed-through” staining
• Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 6000 Shingle Sealer is a premium quality acrylic emulsion that is designed to penetrate and bond to shingles, sealing granules down and beautifying the roof. The fully cured film dries to an attractive satin gloss finish that cleans easily with water and mild detergent.

• Low toxicity and odor (environmentally safe)
• Easy soap and water clean-up (user friendly)
• Excellent adhesion and durability

Thermo-Flex 250 is an economical acrylic elastomeric roof coating uniquely formulated for the protection of polyurethane foam roofing insulation on all new and existing roof substrates. It is designed to withstand the intense heat and ultra-violet rays of low humidity desert environments.

• Reflectivity - UV light resistance
• Energy conservation - reduces building’s energy load and thermal conductivity
• Life-cycle cost reduction with long-term performance and longevity of the roof

Thermo-Flex 750 acrylic roof coating is an acrylic elastomeric fluid-applied coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure.

• Superior exterior durability and UV light resistance
• Severe Hail Rated with LPA Roofing Foam and Coating System
• Seamless, fully-adhered elastomeric membrane

Thermo-Flex 750FS acrylic roof coating is a fluid-applied, fast-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure.

• Superior exterior durability and UV light resistance
• Severe Hail Rated with LPA Roofing Foam and Coating System
• Seamless, fully-adhered elastomeric membrane

Thermo-Flex 750QS acrylic roof coating is a fluid-applied, quick-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications. 

• Superior exterior durability and UV light resistance
• Severe Hail Rated with LPA Roofing Foam and Coating System
• Seamless, fully-adhered elastomeric membrane

Thermo-Flex 1000 acrylic roof coating is an acrylic elastomeric fluid-applied coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications and withstands intense heat and ultraviolet rays in humid climates. 

• Provides a seamless umbrella over new and existing roof substrates
• Best insulation value per inch
• 100% Adhesion

Thermo-Flex 1000FS acrylic roof coating is a fluid-applied, fast-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications.

• Provides a seamless umbrella over new and existing roof substrates
• Best insulation value per inch
• 100% Adhesion

Thermo-Flex 1000QS acrylic roof coating is a fluid-applied quick-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications.

• Provides a seamless umbrella over new and existing roof substrates
• Best insulation value per inch
• 100% Adhesion

Thermo-Flex 1500HT is a technologically advanced, high solids, fire retardant, thixotropic, acrylic elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. It is a premium quality high tensile formulation that also withstands the damp heat and ultra-violet rays of humid environments.

• Superior exterior durability and UV light resistance
• Provides a seamless umbrella over new and existing roof substrates
• Severe Hail Rated with LPA Roofing Foam and Coating System

Thermo-Caulk is designed from 100% acrylic resins. It is a single component, water-based, high-performance elastomeric sealant. It is a knife-grade caulking that when cured forms a tough, flexible membrane that seals out moisture.

• Waterproof
• Easy to apply
• Tenacious adhesion

Thermo-Prime™ acrylic roof primer is a single component, water-soluble acrylic primer that promotes adhesion of spray-in-place polyurethane foam to a variety of roofing substrates including BUR, modified bitumen, concrete, masonry, galvanized metal and wood.