FOAM-LOK FL 10K

FOAM-LOK-FL-10K is a high density spray applied foam designed for use as a protective top coat. The primary use for this product is as a protective coating in the poultry industry. The typical spray applied density of this product ranges from 8.0 to 11.0 pounds per cubic foot.


This product is to be process through standard spray foam metering equipment at a ratio of 1:1 by volume, with the heater for the “A”, “B” and hose set for 125°F to 130°F.

Product Benefits

  • Viscosity 1200 – 1600 cps
  • Cream Time 5-8 Seconds
  • Tack Free Time 14-16 Seconds

Product Data

Other OTHER FOAM SOLUTIONS Products

  • GEOLIFT

    Geolift is a water-blown concrete lifting foam for both residential and commercial use on driveways, sidewalks and patios.

     

    • Available in 2.5 lb and 4 lb densities
    • Application in wider ambient temperature range
    • Hydrophobic properties

  • HEATLOK HIGH TEMP

    Heatlok High Temp is a two-component closed-cell spray foam insulation specially formulated to perform in temperatures as high as 250°F. For use in tanks, pipes and other applications.

    • Aged Thermal Resistance: 7.27 @ 1 inch
    • Tested Water-Resistant Barrier (WRB)
    • Greenguard Gold Certified- Low VOC

  • PIP FOAM

    Specially formulated for field or factory injected applications using high or low pressure equipment. High performance polyurethane foam systems using HFO blowing agent which has a low impact on the environment.  Also available in open cells.

    • Initial R-value of 3.4 to 7.5 per inch (0.6 to 1.32 RSI).
    • Open and closed cell foam
    • Density from 0.5 to 2.5 lb