Roofing Foams

HBS Roofing Foams provide a seamless monolithic membrane, watertight seal and additional energy efficiency.

Combined, the HBS Coating and Foam System protects, preserves and prolongs the life o commercial and multi-family roofs. 

Banner for roofing products
  • FOAM-LOK FL 10K

    FOAM-LOK-FL-10K is a high density spray applied foam designed for use as a protective top coat. The primary use for this product is as a protective coating in the poultry industry. The typical spray applied density of this product ranges from 8.0 to 11.0 pounds per cubic foot.


    This product is to be process through standard spray foam metering equipment at a ratio of 1:1 by volume, with the heater for the “A”, “B” and hose set for 125°F to 130°F.

    • Viscosity 1200 – 1600 cps
    • Cream Time 5-8 Seconds
    • Tack Free Time 14-16 Seconds
  • FOAM-LOK LPA 2800-4G

    FOAM-LOK LPA 2800-4G Roofing Spray Foam is a closed-cell foam specifically designed to deliver a high performance, fully adhered roofing system providing insulation and waterproofing over a variety of roof deck substrates and configurations.

    This product contains PET recycled plastic bottles and an HFO blowing agent, making it the most environmentally conscious insulation, with a zero-ozone depletion potential (ODP) and a global warming potential (GWP) of 1, which is 99.9% lower than current HFC blown products.

    • Thermal Resistance: 6.8 per inch
    • Density ranging from: 2.7 to 2.9 lb
    • Miami-Dade County, Florida Approved
  • FOAM-LOK LPA 2500

    FOAM-LOK LPA 2500 Roofing Spray Foam is a closed-cell foam system specifically designed to provide a high performance, fully adhered, light weight roofing system providing insulation and waterproofing over a variety of roof deck substrates and configurations.

    • Thermal Resistance: 6.5 per inch
    • Density ranging from: 2.4 to 2.6 lb
    • Miami-Dade County, Florida Approved
  • FOAM-LOK LPA 2800

    FOAM-LOK LPA 2800 Roofing Spray Foam is a closed-cell foam system specifically designed to provide a high performance, fully adhered, light weight roofing system providing insulation and waterproofing over a variety of roof deck substrates and configurations.

    • Thermal Resistance: 6.5 per inch
    • Density ranging from: 2.7 to 2.9 lb
    • Miami-Dade County, Florida Approved
  • FOAM-LOK LPA 3000

    FOAM-LOK LPA 3000 Roofing Spray Foam is a closed-cell foam system specifically designed to provide a high performance, fully adhered, light weight roofing system providing insulation and waterproofing over a variety of roof deck substrates and configurations.

    • Thermal Resistance: 6.5 per inch
    • Density ranging from: 2.9 to 3.2 lb
    • Miami-Dade County, Florida Approved
  • FOAM-LOK LPA 100

    FOAM-LOK LPA -100 roofing adhesive is a two-component, water-blown, spray and bead applied roofing adhesive for attachment of insulation and barrier/recover boards over structural
    concrete, metal decks and existing Built-Up roof systems. where mechanical attachment is difficult or undesirable in both new and recover roofing applications.

    • No structural deck damage caused by mechanical fasteners
    • No extensive set-up and breakdown time
    • Rapid application resulting in increased production rates

Find Your Local Contractor Or Buy Direct

Whether you're a contractor looking to buy spray foam direct or need a highly qualified contractor, Huntsman Building Solution's experts are here to support you.